Mingdao1: There is a big difference between yarn and broken thread. Basically, there are burrs on the surface of the spinner "Use the finest sand skin to polish off" or the needle position is lower. If it still doesn't work aft...
Machine repair must be equipped with tools, a set of 6-point wrenches. 8-10, 10-12 wrenches need one. A 35 cm long medium-sized flat-blade screwdriver (1CM wide blade and 0.2-0.3 thickness) is best with iron absorption f...
Embroidery frame won't lock 1. Check whether the AC 100V stepping power supply is normal 2. 8P double row plug on the stepper driver 1.2-pin DC output 140V 3.7-pin AC 7V 4.8-pin AC 7V A: The MON light is on normally BE l...
1. Cable passing system a) The thread passing hole, thread passing wheel, thread passing hook, thread clamping piece, upper, middle and lower thread passing, thread take-up lever, thread take-up spring and other thread...
There are many factors that affect the disconnection. To make the disconnection less, the machine must be parked horizontally and smoothly, and the jitter during operation must be small; the spindle rotation must be ligh...
Three-dimensional embroidery is a kind of embroidery. As the name suggests, it uses embroidery thread to wrap EVA rubber inside to form a three-dimensional effect pattern. 3D three-dimensional embroidery uses foam to emb...
We will constantly adhere to technological innovation . we sincerely hope that we can widely cooperate with friends in all circles at home and aboard to move forward hand in hand and create the embroidery machine’s bright future.
Copyright © Zhuji Mingdao Mechanical &Electrical Co.,Ltd All Rights Reserved.